Current Path :
/
proc
/
self
/
root
/
var
/
softaculous
/
drupalcms
/
Or
Select Your Path :
Upload File :
New :
File
Dir
//proc/self/root/var/softaculous/drupalcms/settings.php
<?php // phpcs:ignoreFile /** * @file * Drupal site-specific configuration file. * * IMPORTANT NOTE: * This file may have been set to read-only by the Drupal installation program. * If you make changes to this file, be sure to protect it again after making * your modifications. Failure to remove write permissions to this file is a * security risk. * * In order to use the selection rules below the multisite aliasing file named * sites/sites.php must be present. Its optional settings will be loaded, and * the aliases in the array $sites will override the default directory rules * below. See sites/example.sites.php for more information about aliases. * * The configuration directory will be discovered by stripping the website's * hostname from left to right and pathname from right to left. The first * configuration file found will be used and any others will be ignored. If no * other configuration file is found then the default configuration file at * 'sites/default' will be used. * * For example, for a fictitious site installed at * https://www.drupal.org:8080/my-site/test/, the 'settings.php' file is searched * for in the following directories: * * - sites/8080.www.drupal.org.my-site.test * - sites/www.drupal.org.my-site.test * - sites/drupal.org.my-site.test * - sites/org.my-site.test * * - sites/8080.www.drupal.org.my-site * - sites/www.drupal.org.my-site * - sites/drupal.org.my-site * - sites/org.my-site * * - sites/8080.www.drupal.org * - sites/www.drupal.org * - sites/drupal.org * - sites/org * * - sites/default * * Note that if you are installing on a non-standard port number, prefix the * hostname with that number. For example, * https://www.drupal.org:8080/my-site/test/ could be loaded from * sites/8080.www.drupal.org.my-site.test/. * * @see example.sites.php * @see \Drupal\Core\DrupalKernel::getSitePath() * * In addition to customizing application settings through variables in * settings.php, you can create a services.yml file in the same directory to * register custom, site-specific service definitions and/or swap out default * implementations with custom ones. */ /** * Database settings: * * The $databases array specifies the database connection or * connections that Drupal may use. Drupal is able to connect * to multiple databases, including multiple types of databases, * during the same request. * * One example of the simplest connection array is shown below. To use the * sample settings, copy and uncomment the code below and paste it after the * $databases declaration. You will need to replace the database username and * password and possibly the host and port with the appropriate credentials for * your database system. * * The next section describes how to customize the $databases array for more * specific needs. * * @code * $databases['default']['default'] = [ * 'database' => 'database_name', * 'username' => 'sql_username', * 'password' => 'sql_password', * 'host' => 'localhost', * 'port' => '3306', * 'driver' => 'mysql', * 'prefix' => '', * 'collation' => 'utf8mb4_general_ci', * ]; * @endcode */ putenv("PATH=[[composer_path]]"); $databases = []; /** * Customizing database settings. * * Many of the values of the $databases array can be customized for your * particular database system. Refer to the sample in the section above as a * starting point. * * The "driver" property indicates what Drupal database driver the * connection should use. This is usually the same as the name of the * database type, such as mysql or sqlite, but not always. The other * properties will vary depending on the driver. For SQLite, you must * specify a database file name in a directory that is writable by the * webserver. For most other drivers, you must specify a * username, password, host, and database name. * * Drupal core implements drivers for mysql, pgsql, and sqlite. Other drivers * can be provided by contributed or custom modules. To use a contributed or * custom driver, the "namespace" property must be set to the namespace of the * driver. The code in this namespace must be autoloadable prior to connecting * to the database, and therefore, prior to when module root namespaces are * added to the autoloader. To add the driver's namespace to the autoloader, * set the "autoload" property to the PSR-4 base directory of the driver's * namespace. This is optional for projects managed with Composer if the * driver's namespace is in Composer's autoloader. * * For each database, you may optionally specify multiple "target" databases. * A target database allows Drupal to try to send certain queries to a * different database if it can but fall back to the default connection if not. * That is useful for primary/replica replication, as Drupal may try to connect * to a replica server when appropriate and if one is not available will simply * fall back to the single primary server (The terms primary/replica are * traditionally referred to as master/slave in database server documentation). * * The general format for the $databases array is as follows: * @code * $databases['default']['default'] = $info_array; * $databases['default']['replica'][] = $info_array; * $databases['default']['replica'][] = $info_array; * $databases['extra']['default'] = $info_array; * @endcode * * In the above example, $info_array is an array of settings described above. * The first line sets a "default" database that has one primary database * (the second level default). The second and third lines create an array * of potential replica databases. Drupal will select one at random for a given * request as needed. The fourth line creates a new database with a name of * "extra". * * For MySQL, MariaDB or equivalent databases the 'isolation_level' option can * be set. The recommended transaction isolation level for Drupal sites is * 'READ COMMITTED'. The 'REPEATABLE READ' option is supported but can result * in deadlocks, the other two options are 'READ UNCOMMITTED' and 'SERIALIZABLE'. * They are available but not supported; use them at your own risk. For more * info: * https://dev.mysql.com/doc/refman/8.0/en/innodb-transaction-isolation-levels.html * * On your settings.php, change the isolation level: * @code * $databases['default']['default']['init_commands'] = [ * 'isolation_level' => 'SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED', * ]; * @endcode * * You can optionally set a prefix for all database table names by using the * 'prefix' setting. If a prefix is specified, the table name will be prepended * with its value. Be sure to use valid database characters only, usually * alphanumeric and underscore. If no prefix is desired, do not set the 'prefix' * key or set its value to an empty string ''. * * For example, to have all database table prefixed with 'main_', set: * @code * 'prefix' => 'main_', * @endcode * * Advanced users can add or override initial commands to execute when * connecting to the database server, as well as PDO connection settings. For * example, to enable MySQL SELECT queries to exceed the max_join_size system * variable, and to reduce the database connection timeout to 5 seconds: * @code * $databases['default']['default'] = [ * 'init_commands' => [ * 'big_selects' => 'SET SQL_BIG_SELECTS=1', * ], * 'pdo' => [ * PDO::ATTR_TIMEOUT => 5, * ], * ]; * @endcode * * WARNING: The above defaults are designed for database portability. Changing * them may cause unexpected behavior, including potential data loss. See * https://www.drupal.org/docs/8/api/database-api/database-configuration for * more information on these defaults and the potential issues. * * More details can be found in the constructor methods for each driver: * - \Drupal\mysql\Driver\Database\mysql\Connection::__construct() * - \Drupal\pgsql\Driver\Database\pgsql\Connection::__construct() * - \Drupal\sqlite\Driver\Database\sqlite\Connection::__construct() * * Sample Database configuration format for PostgreSQL (pgsql): * @code * $databases['default']['default'] = [ * 'driver' => 'pgsql', * 'database' => 'database_name', * 'username' => 'sql_username', * 'password' => 'sql_password', * 'host' => 'localhost', * 'prefix' => '', * ]; * @endcode * * Sample Database configuration format for SQLite (sqlite): * @code * $databases['default']['default'] = [ * 'driver' => 'sqlite', * 'database' => '/path/to/database_filename', * ]; * @endcode * * Sample Database configuration format for a driver in a contributed module: * @code * $databases['default']['default'] = [ * 'driver' => 'my_driver', * 'namespace' => 'Drupal\my_module\Driver\Database\my_driver', * 'autoload' => 'modules/my_module/src/Driver/Database/my_driver/', * 'database' => 'database_name', * 'username' => 'sql_username', * 'password' => 'sql_password', * 'host' => 'localhost', * 'prefix' => '', * ]; * @endcode * * Sample Database configuration format for a driver that is extending another * database driver. * @code * $databases['default']['default'] = [ * 'driver' => 'my_driver', * 'namespace' => 'Drupal\my_module\Driver\Database\my_driver', * 'autoload' => 'modules/my_module/src/Driver/Database/my_driver/', * 'database' => 'database_name', * 'username' => 'sql_username', * 'password' => 'sql_password', * 'host' => 'localhost', * 'prefix' => '', * 'dependencies' => [ * 'parent_module' => [ * 'namespace' => 'Drupal\parent_module', * 'autoload' => 'core/modules/parent_module/src/', * ], * ], * ]; * @endcode */ /** * Location of the site configuration files. * * The $settings['config_sync_directory'] specifies the location of file system * directory used for syncing configuration data. On install, the directory is * created. This is used for configuration imports. * * The default location for this directory is inside a randomly-named * directory in the public files path. The setting below allows you to set * its location. */ # $settings['config_sync_directory'] = '/directory/outside/webroot'; /** * Settings: * * $settings contains environment-specific configuration, such as the files * directory and reverse proxy address, and temporary configuration, such as * security overrides. * * @see \Drupal\Core\Site\Settings::get() */ /** * Salt for one-time login links, cancel links, form tokens, etc. * * This variable will be set to a random value by the installer. All one-time * login links will be invalidated if the value is changed. Note that if your * site is deployed on a cluster of web servers, you must ensure that this * variable has the same value on each server. * * For enhanced security, you may set this variable to the contents of a file * outside your document root, and vary the value across environments (like * production and development); you should also ensure that this file is not * stored with backups of your database. * * Example: * @code * $settings['hash_salt'] = file_get_contents('/home/example/salt.txt'); * @endcode */ $settings['hash_salt'] = '[[hash_salt]]'; /** * Deployment identifier. * * Drupal's dependency injection container will be automatically invalidated and * rebuilt when the Drupal core version changes. When updating contributed or * custom code that changes the container, changing this identifier will also * allow the container to be invalidated as soon as code is deployed. */ # $settings['deployment_identifier'] = \Drupal::VERSION; /** * Access control for update.php script. * * If you are updating your Drupal installation using the update.php script but * are not logged in using either an account with the "Administer software * updates" permission or the site maintenance account (the account that was * created during installation), you will need to modify the access check * statement below. Change the FALSE to a TRUE to disable the access check. * After finishing the upgrade, be sure to open this file again and change the * TRUE back to a FALSE! */ $settings['update_free_access'] = FALSE; /** * Fallback to HTTP for Update Status and for fetching security advisories. * * If your site fails to connect to updates.drupal.org over HTTPS (either when * fetching data on available updates, or when fetching the feed of critical * security announcements), you may uncomment this setting and set it to TRUE to * allow an insecure fallback to HTTP. Note that doing so will open your site up * to a potential man-in-the-middle attack. You should instead attempt to * resolve the issues before enabling this option. * @see https://www.drupal.org/docs/system-requirements/php-requirements#openssl * @see https://en.wikipedia.org/wiki/Man-in-the-middle_attack * @see \Drupal\update\UpdateFetcher * @see \Drupal\system\SecurityAdvisories\SecurityAdvisoriesFetcher */ # $settings['update_fetch_with_http_fallback'] = TRUE; /** * External access proxy settings: * * If your site must access the Internet via a web proxy then you can enter the * proxy settings here. Set the full URL of the proxy, including the port, in * variables: * - $settings['http_client_config']['proxy']['http']: The proxy URL for HTTP * requests. * - $settings['http_client_config']['proxy']['https']: The proxy URL for HTTPS * requests. * You can pass in the user name and password for basic authentication in the * URLs in these settings. * * You can also define an array of host names that can be accessed directly, * bypassing the proxy, in $settings['http_client_config']['proxy']['no']. */ # $settings['http_client_config']['proxy']['http'] = 'http://proxy_user:proxy_pass@example.com:8080'; # $settings['http_client_config']['proxy']['https'] = 'http://proxy_user:proxy_pass@example.com:8080'; # $settings['http_client_config']['proxy']['no'] = ['127.0.0.1', 'localhost']; /** * Reverse Proxy Configuration: * * Reverse proxy servers are often used to enhance the performance * of heavily visited sites and may also provide other site caching, * security, or encryption benefits. In an environment where Drupal * is behind a reverse proxy, the real IP address of the client should * be determined such that the correct client IP address is available * to Drupal's logging and access management systems. In the most simple * scenario, the proxy server will add an X-Forwarded-For header to the request * that contains the client IP address. However, HTTP headers are vulnerable to * spoofing, where a malicious client could bypass restrictions by setting the * X-Forwarded-For header directly. Therefore, Drupal's proxy configuration * requires the IP addresses of all remote proxies to be specified in * $settings['reverse_proxy_addresses'] to work correctly. * * Enable this setting to get Drupal to determine the client IP from the * X-Forwarded-For header. If you are unsure about this setting, do not have a * reverse proxy, or Drupal operates in a shared hosting environment, this * setting should remain commented out. * * In order for this setting to be used you must specify every possible * reverse proxy IP address in $settings['reverse_proxy_addresses']. * If a complete list of reverse proxies is not available in your * environment (for example, if you use a CDN) you may set the * $_SERVER['REMOTE_ADDR'] variable directly in settings.php. * Be aware, however, that it is likely that this would allow IP * address spoofing unless more advanced precautions are taken. */ # $settings['reverse_proxy'] = TRUE; /** * Reverse proxy addresses. * * Specify every reverse proxy IP address in your environment, as an array of * IPv4/IPv6 addresses or subnets in CIDR notation. This setting is required if * $settings['reverse_proxy'] is TRUE. */ # $settings['reverse_proxy_addresses'] = ['a.b.c.d', 'e.f.g.h/24', ...]; /** * Reverse proxy trusted headers. * * Sets which headers to trust from your reverse proxy. * * Common values are: * - \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_FOR * - \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_HOST * - \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_PORT * - \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_PROTO * - \Symfony\Component\HttpFoundation\Request::HEADER_FORWARDED * * Note the default value of * @code * \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_FOR | \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_HOST | \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_PORT | \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_PROTO | \Symfony\Component\HttpFoundation\Request::HEADER_FORWARDED * @endcode * is not secure by default. The value should be set to only the specific * headers the reverse proxy uses. For example: * @code * \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_FOR | \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_HOST | \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_PORT | \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_PROTO * @endcode * This would trust the following headers: * - X_FORWARDED_FOR * - X_FORWARDED_HOST * - X_FORWARDED_PROTO * - X_FORWARDED_PORT * * @see \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_FOR * @see \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_HOST * @see \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_PORT * @see \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_PROTO * @see \Symfony\Component\HttpFoundation\Request::HEADER_FORWARDED * @see \Symfony\Component\HttpFoundation\Request::setTrustedProxies */ # $settings['reverse_proxy_trusted_headers'] = \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_FOR | \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_HOST | \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_PORT | \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_PROTO | \Symfony\Component\HttpFoundation\Request::HEADER_FORWARDED; /** * Page caching: * * By default, Drupal sends a "Vary: Cookie" HTTP header for anonymous page * views. This tells a HTTP proxy that it may return a page from its local * cache without contacting the web server, if the user sends the same Cookie * header as the user who originally requested the cached page. Without "Vary: * Cookie", authenticated users would also be served the anonymous page from * the cache. If the site has mostly anonymous users except a few known * editors/administrators, the Vary header can be omitted. This allows for * better caching in HTTP proxies (including reverse proxies), i.e. even if * clients send different cookies, they still get content served from the cache. * However, authenticated users should access the site directly (i.e. not use an * HTTP proxy, and bypass the reverse proxy if one is used) in order to avoid * getting cached pages from the proxy. */ # $settings['omit_vary_cookie'] = TRUE; /** * Cache TTL for client error (4xx) responses. * * Items cached per-URL tend to result in a large number of cache items, and * this can be problematic on 404 pages which by their nature are unbounded. A * fixed TTL can be set for these items, defaulting to one hour, so that cache * backends which do not support LRU can purge older entries. To disable caching * of client error responses set the value to 0. Currently applies only to * page_cache module. */ # $settings['cache_ttl_4xx'] = 3600; /** * Expiration of cached forms. * * Drupal's Form API stores details of forms in a cache and these entries are * kept for at least 6 hours by default. Expired entries are cleared by cron. * * @see \Drupal\Core\Form\FormCache::setCache() */ # $settings['form_cache_expiration'] = 21600; /** * Class Loader. * * If the APCu extension is detected, the classloader will be optimized to use * it. Set to FALSE to disable this. * * @see https://getcomposer.org/doc/articles/autoloader-optimization.md */ # $settings['class_loader_auto_detect'] = FALSE; /** * Default mode for directories and files written by Drupal. * * Value should be in PHP Octal Notation, with leading zero. */ # $settings['file_chmod_directory'] = 0775; # $settings['file_chmod_file'] = 0664; /** * Optimized assets path: * * A local file system path where optimized assets will be stored. This directory * must exist and be writable by Drupal. This directory must be relative to * the Drupal installation directory and be accessible over the web. */ # $settings['file_assets_path'] = 'sites/default/files'; /** * Asset aggregate garbage collection threshold. * * During cache clears, JavaScript and CSS aggregates older than this threshold * will be deleted. Set this to 0 to immediately delete all files, e.g. during * development. */ # $settings['aggregate_gc_threshold'] = 86400 * 45; /** * Public file base URL: * * An alternative base URL to be used for serving public files. This must * include any leading directory path. * * A different value from the domain used by Drupal to be used for accessing * public files. This can be used for a simple CDN integration, or to improve * security by serving user-uploaded files from a different domain or subdomain * pointing to the same server. Do not include a trailing slash. */ # $settings['file_public_base_url'] = 'http://downloads.example.com/files'; /** * Public file path: * * A local file system path where public files will be stored. This directory * must exist and be writable by Drupal. This directory must be relative to * the Drupal installation directory and be accessible over the web. */ # $settings['file_public_path'] = 'sites/default/files'; /** * Additional public file schemes: * * Public schemes are URI schemes that allow download access to all users for * all files within that scheme. * * The "public" scheme is always public, and the "private" scheme is always * private, but other schemes, such as "https", "s3", "example", or others, * can be either public or private depending on the site. By default, they're * private, and access to individual files is controlled via * hook_file_download(). * * Typically, if a scheme should be public, a module makes it public by * implementing hook_file_download(), and granting access to all users for all * files. This could be either the same module that provides the stream wrapper * for the scheme, or a different module that decides to make the scheme * public. However, in cases where a site needs to make a scheme public, but * is unable to add code in a module to do so, the scheme may be added to this * variable, the result of which is that system_file_download() grants public * access to all files within that scheme. */ # $settings['file_additional_public_schemes'] = ['example']; /** * File schemes whose paths should not be normalized: * * Normally, Drupal normalizes '/./' and '/../' segments in file URIs in order * to prevent unintended file access. For example, 'private://css/../image.png' * is normalized to 'private://image.png' before checking access to the file. * * On Windows, Drupal also replaces '\' with '/' in URIs for the local * filesystem. * * If file URIs with one or more scheme should not be normalized like this, then * list the schemes here. For example, if 'porcelain://china/./plate.png' should * not be normalized to 'porcelain://china/plate.png', then add 'porcelain' to * this array. In this case, make sure that the module providing the 'porcelain' * scheme does not allow unintended file access when using '/../' to move up the * directory tree. */ # $settings['file_sa_core_2023_005_schemes'] = ['porcelain']; /** * Configuration for phpinfo() admin status report. * * Drupal's admin UI includes a report at admin/reports/status/php which shows * the output of phpinfo(). The full output can contain sensitive information * so by default Drupal removes some sections. * * This behavior can be configured by setting this variable to a different * value corresponding to the flags parameter of phpinfo(). * * If you need to expose more information in the report - for example to debug a * problem - consider doing so temporarily. * * @see https://www.php.net/manual/function.phpinfo.php */ # $settings['sa_core_2023_004_phpinfo_flags'] = ~ (INFO_VARIABLES | INFO_ENVIRONMENT); /** * Private file path: * * A local file system path where private files will be stored. This directory * must be absolute, outside of the Drupal installation directory and not * accessible over the web. * * Note: Caches need to be cleared when this value is changed to make the * private:// stream wrapper available to the system. * * See https://www.drupal.org/documentation/modules/file for more information * about securing private files. */ # $settings['file_private_path'] = ''; /** * Temporary file path: * * A local file system path where temporary files will be stored. This directory * must be absolute, outside of the Drupal installation directory and not * accessible over the web. * * If this is not set, the default for the operating system will be used. * * @see \Drupal\Component\FileSystem\FileSystem::getOsTemporaryDirectory() */ # $settings['file_temp_path'] = '/tmp'; /** * Automatically create an Apache HTTP .htaccess file in writable directories. * * This setting can be disabled if you are not using Apache HTTP server, or if * you have a web server configuration that protects the various writable file * directories. * * @see \Drupal\Component\FileSecurity\FileSecurity::writeHtaccess() * @see https://www.drupal.org/docs/administering-a-drupal-site/security-in-drupal/securing-file-permissions-and-ownership */ # $settings['auto_create_htaccess'] = FALSE; /** * Session write interval: * * Set the minimum interval between each session write to database. * For performance reasons it defaults to 180. */ # $settings['session_write_interval'] = 180; /** * String overrides: * * To override specific strings on your site with or without enabling the Locale * module, add an entry to this list. This functionality allows you to change * a small number of your site's default English language interface strings. * * Remove the leading hash signs to enable. * * The "en" part of the variable name, is dynamic and can be any langcode of * any added language. (eg locale_custom_strings_de for german). */ # $settings['locale_custom_strings_en'][''] = [ # 'Home' => 'Front page', # 'Last run @time ago' => 'Last run was done @time ago', # ]; /** * A custom theme for the offline page: * * This applies when the site is explicitly set to maintenance mode through the * administration page or when the database is inactive due to an error. * The template file should also be copied into the theme. It is located inside * 'core/modules/system/templates/maintenance-page.html.twig'. * * Note: This setting does not apply to installation and update pages. */ # $settings['maintenance_theme'] = 'claro'; /** * PHP settings: * * To see what PHP settings are possible, including whether they can be set at * runtime (by using ini_set()), read the PHP documentation: * http://php.net/manual/ini.list.php * See \Drupal\Core\DrupalKernel::bootEnvironment() for required runtime * settings and the .htaccess file for non-runtime settings. * Settings defined there should not be duplicated here so as to avoid conflict * issues. */ /** * If you encounter a situation where users post a large amount of text, and * the result is stripped out upon viewing but can still be edited, Drupal's * output filter may not have sufficient memory to process it. If you * experience this issue, you may wish to uncomment the following two lines * and increase the limits of these variables. For more information, see * http://php.net/manual/pcre.configuration.php. */ # ini_set('pcre.backtrack_limit', 200000); # ini_set('pcre.recursion_limit', 200000); /** * Configuration overrides. * * To globally override specific configuration values for this site, * set them here. You usually don't need to use this feature. This is * useful in a configuration file for a vhost or directory, rather than * the default settings.php. * * Note that any values you provide in these variable overrides will not be * viewable from the Drupal administration interface. The administration * interface displays the values stored in configuration so that you can stage * changes to other environments that don't have the overrides. * * There are particular configuration values that are risky to override. For * example, overriding the list of installed modules in 'core.extension' is not * supported as module install or uninstall has not occurred. Other examples * include field storage configuration, because it has effects on database * structure, and 'core.menu.static_menu_link_overrides' since this is cached in * a way that is not config override aware. Also, note that changing * configuration values in settings.php will not fire any of the configuration * change events. */ # $config['system.site']['name'] = 'My Drupal site'; # $config['user.settings']['anonymous'] = 'Visitor'; /** * Enable HTML5 form validation. * * Drupal 12 will disable HTML5 form validation by default due to issues with * usability and accessibility. Setting this to TRUE will allow user agents to * continue performing client-side HTML5 validation. This prevents Drupal's * Form API (FAPI) validation from executing, so FAPI validation error messages * may not be displayed including those for required elements. * * Setting this to FALSE will cause HTML5 validation to be disabled on all * forms. Only Drupal's server-side validation will be executed. * * This setting will be removed in Drupal 13. * * @see https://www.drupal.org/node/3537128 */ # $settings['enable_html5_validation'] = TRUE; /** * Load services definition file. */ $settings['container_yamls'][] = $app_root . '/' . $site_path . '/services.yml'; /** * Override the default service container class. * * This is useful for example to trace the service container for performance * tracking purposes, for testing a service container with an error condition or * to test a service container that throws an exception. */ # $settings['container_base_class'] = '\Drupal\Core\DependencyInjection\Container'; /** * Trusted host configuration. * * Drupal core can use the Symfony trusted host mechanism to prevent HTTP Host * header spoofing. * * To enable the trusted host mechanism, you enable your allowable hosts * in $settings['trusted_host_patterns']. This should be an array of regular * expression patterns, without delimiters, representing the hosts you would * like to allow. * * For example: * @code * $settings['trusted_host_patterns'] = [ * '^www\.example\.com$', * ]; * @endcode * will allow the site to only run from www.example.com. * * If you are running multisite, or if you are running your site from * different domain names (eg, you don't redirect http://www.example.com to * http://example.com), you should specify all of the host patterns that are * allowed by your site. * * For example: * @code * $settings['trusted_host_patterns'] = [ * '^example\.com$', * '^.+\.example\.com$', * '^example\.org$', * '^.+\.example\.org$', * ]; * @endcode * will allow the site to run off of all variants of example.com and * example.org, with all subdomains included. * * @see https://www.drupal.org/docs/installing-drupal/trusted-host-settings */ # $settings['trusted_host_patterns'] = []; /** * The default list of directories that will be ignored by Drupal's file API. * * By default ignore node_modules and bower_components folders to avoid issues * with common frontend tools and recursive scanning of directories looking for * extensions. * * @see \Drupal\Core\File\FileSystemInterface::scanDirectory() * @see \Drupal\Core\Extension\ExtensionDiscovery::scanDirectory() */ $settings['file_scan_ignore_directories'] = [ 'node_modules', 'bower_components', ]; /** * The default number of entities to update in a batch process. * * This is used by update and post-update functions that need to go through and * change all the entities on a site, so it is useful to increase this number * if your hosting configuration (i.e. RAM allocation, CPU speed) allows for a * larger number of entities to be processed in a single batch run. */ $settings['entity_update_batch_size'] = 50; /** * Entity update backup. * * This is used to inform the entity storage handler that the backup tables as * well as the original entity type and field storage definitions should be * retained after a successful entity update process. */ $settings['entity_update_backup'] = TRUE; /** * Node migration type. * * This is used to force the migration system to use the classic node migrations * instead of the default complete node migrations. The migration system will * use the classic node migration only if there are existing migrate_map tables * for the classic node migrations and they contain data. These tables may not * exist if you are developing custom migrations and do not want to use the * complete node migrations. Set this to TRUE to force the use of the classic * node migrations. */ $settings['migrate_node_migrate_type_classic'] = FALSE; /** * The default settings for migration sources. * * These settings are used as the default settings on the Credential form at * /upgrade/credentials. * * - migrate_source_version - The version of the source database. This can be * '6' or '7'. Defaults to '7'. * - migrate_source_connection - The key in the $databases array for the source * site. * - migrate_file_public_path - The location of the source Drupal 6 or Drupal 7 * public files. This can be a local file directory containing the source * Drupal 6 or Drupal 7 site (e.g /var/www/docroot), or the site address * (e.g http://example.com). * - migrate_file_private_path - The location of the source Drupal 7 private * files. This can be a local file directory containing the source Drupal 7 * site (e.g /var/www/docroot), or empty to use the same value as Public * files directory. * * Sample configuration for a drupal 6 source site with the source files in a * local directory. * * @code * $settings['migrate_source_version'] = '6'; * $settings['migrate_source_connection'] = 'migrate'; * $settings['migrate_file_public_path'] = '/var/www/drupal6'; * @endcode * * Sample configuration for a drupal 7 source site with public source files on * the source site and the private files in a local directory. * * @code * $settings['migrate_source_version'] = '7'; * $settings['migrate_source_connection'] = 'migrate'; * $settings['migrate_file_public_path'] = 'https://drupal7.com'; * $settings['migrate_file_private_path'] = '/var/www/drupal7'; * @endcode */ # $settings['migrate_source_connection'] = ''; # $settings['migrate_source_version'] = ''; # $settings['migrate_file_public_path'] = ''; # $settings['migrate_file_private_path'] = ''; /** * Media oEmbed discovery trusted host configuration. * * The oEmbed spec allows for provider/resource discovery by fetching a URL. The * patterns here restrict which domains Drupal will make a request to for oEmbed * discovery. * * For example: * @code * $settings['media_oembed_discovery_trusted_host_patterns'] = [ * '^www\.example\.com$', * ]; * @endcode * will allow the site to make oEmbed discovery requests to www.example.com. */ # $settings['media_oembed_discovery_trusted_host_patterns'] = []; /** * Load local development override configuration, if available. * * Create a settings.local.php file to override variables on secondary (staging, * development, etc.) installations of this site. * * Typical uses of settings.local.php include: * - Disabling caching. * - Disabling JavaScript/CSS compression. * - Rerouting outgoing emails. * * Keep this code block at the end of this file to take full effect. */ # # if (file_exists($app_root . '/' . $site_path . '/settings.local.php')) { # include $app_root . '/' . $site_path . '/settings.local.php'; # } # # Appended to default.settings.php by Drupal CMS's scaffold plugin configuration. # // Always export configuration outside the web root, per best practice. $sync_directory = realpath('../config/sync'); if (is_dir($sync_directory)) { $settings['config_sync_directory'] ??= $sync_directory; } // If the `assets` directory exists at the project root, Package Manager must copy it // into the sandbox directory so that the scaffolding operations can succeed. The // `assets` directory's location may vary, depending on the project layout. // @todo Remove when https://www.drupal.org/node/3531174 is fixed in core, allowing // explicit unknown paths to be included in the sandbox directory. $assets_directory = realpath('../assets') ?: realpath('assets'); $config['package_manager.settings']['include_unknown_files_in_project_root'] ??= is_dir($assets_directory); # # End of settings appended by Drupal CMS. # $databases['default']['default'] = array ( 'database' => '[[softdb]]', 'username' => '[[softdbuser]]', 'password' => '[[softdbpass]]', 'prefix' => '[[dbprefix]]', 'host' => '[[softdbhost]]', 'port' => '3306', 'isolation_level' => '', 'driver' => 'mysql', 'namespace' => 'Drupal\\mysql\\Driver\\Database\\mysql', 'autoload' => 'core/modules/mysql/src/Driver/Database/mysql/', ); $settings['config_sync_directory'] = '[[config_directories]]';
